To repeat a previous order in part or full, click the link above. To purchase or view any of the items you have purchased before, simply select it from the list below.
Shopping Cart Items:
Your Cart Is Empty
Click on image for full size
85A/12V 1260 Watt Diversion Dummy Load Resistor Heater 85A/12V 1260 Watt Diversion Dummy Load Resistor Heater For 12 volt systems (Out of Stock)
L85A12V
Coleman Air
85 Amp, 1260 Watt, 12 Volt Diversion Load Center
Designed for use with Diversion Controllers
This Diversion Center Can be mounted on to a wall to provide heating as well as serve as a diversion (dummy) load.
These resistors have been selected specifically to perform as diversion (dummy) loads in solar/wind/hydro alternate energy systems. Unlike water heating elements, this unit does not need to be submerged in water or oil. It will operate in free air.
Each of the resistors we sell has been selected based on it's ability to dissipate a very specific amount of power (watts) with a very specific resistance value (ohms), at a very specific voltage. When used as recommended, they will not burn out, even under continuous use.
Please note. These resistors will become hot during normal use, please mount them away from heat sensitive objects and out of the reach of children.
The panel consists of twelve resistors mounted directly onto two sheets of CNC cut, 16 gauge metal sheets (An inner sheet and outer sheet). These two sheets form the electrical connection for the twelve resistors. Both sheets are mounted to a solid piece of 3/4" oak plywood. Two terminals with brass nuts are provided for a solid connection to your wiring. Four 1/4" nylon insulated mounting holes are located at the four corners for easy mounting to a wall or other solid structure.
Load specs per resistor.
Ohms
Volts
Amps
Watts
2
12
6.00
72.00
2
12.5
6.25
78.13
2
13
6.50
84.50
2
13.5
6.75
91.13
2
14
7.00
98.00
2
14.25
7.13
101.53
2
14.5
7.25
105.13
2
15
7.50
112.50
Area in green is where most diversion controllers would be set to divert.
This Diversion Center consists of twelve - 2 ohm resistors. Each 2 ohm resistor will dissipate 7.25 amps at 14.5 volts. This is 105 watts/resistor. 12 resistors in parallel will dissipate 1260 watts at 14.5 volts (87 Amps)
This Diversion Load center is a perfect companion to a 1000 watt 12 volt wind generator and our C160 controller. Please do not use this unit on 24 volt systems as it will be damaged quickly, and may result in fire, injury or worse! Please see our other listings for 24 and 48 volt diversion centers.
If used with our C80 controller, please remove 2 of the resistors to prevent damage to the C80 controller as the C80 is rated at 80 amps and this unit will dissipate nearly 90 amps.
Please contact us if you have wiring questions.
Since many of us often don't want to take a chance on something from a smaller business, and tend to think that big named products are always better. I thought it might help to pass on some of the feedback from those who have purchased this controller in the last couple of weeks.
Full Controllers:
PERFECT ! DIVERSION CONTROLLER IS PERFECT ! WISH I COULD GIVE HIGHER RATING !
A very good packaged product.The instructions are an easy read.
As advertised good e-bayer
Item as described, fast shipping
Great Seller! FAST Shipping! A+++
Great product. Got everything working great! Thanks!
ITEM ARRIVED VERY QUICKLY, VERY WELL PACKAGED, RECOMMENDED SELLER
More to come: Put us on your watch list, we are currently working on a series of new products specifically for the solar/wind market.
Big things are happening from a lot of little companies, and if you notice the truly innovate products are being released from the new kids on the block.
Due to major delays in customs, we no longer ship to Italy.
dump load
Featured videos
Copyright 2010-2017 Coleman Air, Inc. All rights reserved.
Have Questions? -- Please call us at 1-800-577-4169
We verify orders.
In addition to standard credit card verification procedures which insure the credit card is not stolen, we also verify the computer IP address, phone numbers, etc., to ensure the person placing the order is not doing so for fraudulent purposes. We work with all applicable agencies to prevent and/or report fraudulent or suspicious activity.
