My Account | Login | Checkout

You are not logged in

Enter the search term for the product you are looking for below:

More Options
Display my previous orders

To repeat a previous order in part or full, click the link above. To purchase or view any of the items you have purchased before, simply select it from the list below.
Controllers/Regulators
Rectifiers and Diodes
Diversion Loads (Resistors)
Volt & Amp Meters
Breakers, Switches and More...
..Breaker Boxes and Combiner Boxes
..Breakers, Fuses and Switches
..Miscellaneous
Articles and Info
440A 12/24/48V Wind/Solar Diversion-Charge Controller with V/A Meter
40A Amp Wind/Solar Diversion-Charge Load Controller No Enclosure
160A Amp Wind/Solar Diversion-Charge Load Controller With Meter
85 AMP 600 VOLT BLOCKING DIODE WIND/GENERATOR/SOLAR
3 Phase Turbine Switch with Brake
 List All products
 RSS Feed
Coleman Air C150-SMA Controller

150A 12/24/48V Wind/Solar - PWM Charge Controller with V/A Meter
Wind/Solar Solid-State PWM Solar/Wind Charge Controller.
150 Amp 12, 24 or 48 volts.
High contrast LED dual volt/amp meters with on/off switch.
Built in D/C Breakers. Designed for both wind and solar.
8 x 12 Hoffman Box.
Reverse polarity, over-voltage, over-current protected.
Now retrofitted with larger external heat dissipation.


Click here to download the manual

Product Code: C150-SMA







Coleman Air







150 Amp - Solid State PWM Charge Controller

With Two High contrast Meters (both Volts and Amps)

Two D/C breakers/disconnects.

Solar/Wind/Hydro

Works directly with 12, 24 and 48 volt systems


This solid-state (no relays or solenoids) charge controller has been specifically designed for large to medium sized solar or turbine, battery based alternate energy systems of up to 150 amps (100 amps for diversion mode). With thousands of hours of R&D, this controller solves many of the issues currently unaddressed in most if not all other charge controllers. One of the most prevalent problems has been, how to handle more than 60 amps of solar power without using multiple controllers. Most charge controllers on the market use one or two power mosfets, generally limiting their current capabilities to a range of 40-60 amps. The Coleman Air C150-SMA uses six high-power (230 amps each), in a back-to-back, parallel configuration, allowing a significant increase in total current handling capability. Our in house testing has shown that this controller can handle surges of 12,500 watts! We are unaware of any other solid-state charge controller that can come close to this level of power handling. Simply stated, this is the largest PWM solar battery charge controller available.


Use this controller to regulate and prevent battery overcharge in:

  • Solar Systems
  • Wind Systems
  • Hydro Systems

    Some of the key featuresof this controller are:

     

    • Microprocessor controlled -- This is very important for both stability and functionality.
    • Solid-State. No relays or solenoids to wear out.
    • PWM (pulse width modulation) charging.(Charges using pulses of varying lengths)
    • Three stage charging for better battery life.
    • Both manual and automatic (30 day) equalize function.
    • User changeable settings -- Several controllers on the market set the voltage levels, and that's that!
    • High amp rating – 150 amps solar mode, 100 amps diversion mode.
    • Over-current, over-voltage and overheat protection.
    • Multiple system voltage settings – Easy to set jumper allows use on 12, 24 or 48 volt systems.
    • High Contrast LED battery voltage and amperage meters.
    • On/Off switch for the meters to allow extremely low idle current.
    • Battery and charge status LEDs- Several controllers do not tell you what's going on - This one does!
    • Push to test. - Ever wonder if your controller & load are working OK?
    • Reverse polarity protected – This unit will not be damaged if you inadvertently reverse the inputs.
    • Steel enclosure - with multiple conduit openings and cooling vents
    • Large terminals - that can actually terminate large wire, with lugs that accept up to #2 wire.
    • Extended diversion mode (EDM.)
    • Works as either a solar charge controller (series), or a diversion controller for wind/hydro systems. The controller will automatically sense the appropriate mode.
    • Passive cooling systems uses aluminum cooling pipes that run the length of the unit for continuous cooling of the entire unit allowing for proper operation at high power levels.
    • Two internal 150-amp breakers with manual reset/disconnect.
    • No blocking diodes are required for solar. The back-to-back mosfets prevent reverse leakage.
    • A PWM controller that adapts its pulse logic to perfectly accommodate wind systems.
    • The Largest PWM controller available, and at a price per watt that can easily be justified.

    Note: Continuous power handling will be reduced in hot climates or installations.



    The micro processor is the heart of the controller. The battery level is constantly checked by the microprocessor and compared to the active mode’s (Float, Bulk or Equalize) set point to determine how much (if any) current should flow into or out of the batteries. As the battery’s level of charge increases, so does the voltage of the battery (the battery’s level of charge can be determined by the voltage of the battery.) As the charge level increases the controller may use very short pulses of energy to “top off” or maintain the charge at the optimum level. These pulses of energy will be of varying lengths as required. This charging algorithm is referred to as pulse width modulation (or PWM), and when properly controlled, offers a very suitable method of charging deep cycle batteries to ensure good battery health and longevity.

     

     

    Settings are of course user changeable! By simply turning the set point potentiometers with a small screwdriver, you can quickly adjust the trip point for the float or bulk mode. (Equalize mode is about 7% higher then the bulk mode).

     

     

     

    Six very powerful 230A mosfets are wired into three pairs (of two) to insure plenty of reserve capacity above the rated 150 amps this controller has been designed to handle. The mosfets are arranged in such a manner that they can handle currents in either direction; that is, they can perform in the capacity of a solar charge controller or a diversion mode controller. The controller automatically determines the proper mode of operation. If the controller senses that there is voltage on the “Solar/Diversion” terminal then it assumes that the controller has been wired as for the solar mode. If there is no voltage present on this terminal, then the diversion mode will instead be chosen. This terminal is checked often by the microprocessor to insure the controller selects the proper mode. If no connection has been made to the “Solar/Diversion” terminals, then the mode may be either.

     
     




    The enclosure is heavy gauge, solid steel, ready to mount. -- No plastic, no junk, simple and rugged.

    This Hoffman pull box is perfect for terminating larger wire. It has multiple knockouts on each side of the box. The box measures 8.25" x 12". The electronics are fully isolated from the box.





    When you compare this controller to the others, you will see why we built it and why we know you'll love it.



    A quality built controller, no skimping on parts, insuring the best fit for the most demanding solar installations, ready to go work!






    Note: The hookup drawings below display an older model C150-SMA; however the hookups remain the same.





    Ready to go. built to last, right here in the USA.
















    Three Phase turbine wiring diagram

    Click here to download the C150-SMA Charge Controller Manual.

     



    It would take nearly four C40 solar charge controllers to equal this one controller, 2-1/2, C60 solar controllers and nearly 2, C80 charge controllers. Compare the price saving and extra cost of wiring all of these charge controllers. In addition, the Coleman Air C150 (SMA) PWM charge controller has both volt and amp meters, dual disconnects with built in breakers, test, auto equalize, 3 stage charge battery charging. Super convenient, super powerful (high amperage, high voltage charge controller), all in a ready to go package. A PWM controller, built here in the USA (Check out where the big name C40, C60 etc. controllers are built -- Do your homework, they are not built here!).



    More to come:
    Put us on your watch list, we are currently working on a series of new products specifically for the solar/wind market.

    Big things are happening from a lot of little companies, and if you notice the truly innovate products are being released from the new kids on the block.

     

     

    Click here to view our frequently asked questions. (FAQ)



    Tags:

    Solar Charge Controller. PV Charge Controller. Battery Charge Controller. PWM charge controller. Solar panel charge controller. High amp charge controller. High current charge controller. Photovoltaic charge controller. Series charge controller. Bulk, Adsorption. float 3 stage charge controller. Compare to Xantrex (tm), Outback (tm), Sunny Boy (tm), Morning Star (tm), Sunforce, Steca, C40, C60, C80







    Click here to download the manual

     

    Related Items
     
    440 Amp Controllers Our top of the line Diversion/Disconnect Controller. 440 Amps, 10,000 Watts! Perfect for large solar arrays and turbines.
    160 Amp Controllers This is a great controller line, ready to go. Perfect for most any average to mid sized solar/wind system.
    80 Amp Controllers Plenty of controller for most small systems. Very nice industrial duty weather tight enclosure.
    Controllers-No Enclosure Essentially the same electronics, without the enclosure. Perfect if you prefer to mount in your own enclosure.
    Diversion Controller Kits Perfect for the experimenter, DIYer. All of the components and PCB board, just solder it all together and you have a controller that is very expandable and very economical. No enclosure is included.
    Rectifiers and Blocking Diodes 3 Phase rectifiers for AC turbines and Blocking diodes to prevent reverse current flow.
    Diversion (dummy) Loads Diversion load centers and power resistors.
    Voltage and Amperage Meters Innovative voltage and amperage meters.
    Wind Turbines and Parts Our own line of wind turbines built right here in our CNC shop.


    Customers who bought this item also bought

    12 Volt, 440 Amp Relay
    12 Volt, high amperage continuous duty relay.

    click to see more

    3˝ Digital Blue LED DC 0 to ±200V Volt Panel Meter
    3˝ Digital Blue LED DC 0 to ±200V Volt Panel Meter - Requires a 5v Supply

    click to see more

    SpecPricing
    Adjustments and Discounts

    click to see more

    100 Volt - 100 Amp Dual Panel Meter - 3 Gang Box
    12/24/48 Volt, 100 Amp DC Digital Blue Dual LED Panel Meter on/off Switch
    8.5 to 100 volts - No separate power required. 3 Gang Switch Box.

    click to see more

    440A 12/24/48V Wind/Solar Diversion-Charge Controller with V/A Meter
    Wind/Solar Diversion-Charge Load Controller.
    440 Amp 12, 24 or 48 volts.
    High contrast LED dual volt/amp meters with on/off switch.
    Built in D/C Breakers.
    Factory wired for both wind and solar.
    10,000 Watts! 8 x 12 Hoffman Box.
    Reverse polarity protected.

    click to see more







    Official PayPal Seal


    We verify orders.

    In addition to standard credit card verification procedures which insure the credit card is not stolen, we also verify the computer IP address, phone numbers, etc., to ensure the person placing the order is not doing so for fraudulent purposes. We work with all applicable agencies to prevent and/or report fraudulent or suspicious activity.

    Have Questions? -- Please call us at 1-800-577-4169
    Copyright 2010-2017 Coleman Air. All rights reserved.